October 3, 2026

Windows 10 USB Ports Not Working After Update: Getting Devices to Respond Again

After an update and a restart, the mouse will not light up and the flash drive goes unnoticed. Windows 10 USB ports not working after update can affect a single port or all judolbet88 of them.

Updates sometimes replace the drivers for USB controllers or change power-management behaviour. The ports themselves are almost never physically damaged by software.

If the keyboard and mouse are both USB and have stopped, the built-in laptop keyboard or a restart into the recovery menu allows you to continue.

Possible Causes

USB failure after an update usually comes from these:

• The USB controller driver was replaced or did not load.
• Power-saving settings are switching the ports off.
• Fast Startup has preserved a faulty hardware state.
• Chipset drivers are now out of step with the updated system.

A full power drain clears a surprising number of these cases.

Quick Fixes to Try First

Reset the hardware state.

1. Shut the PC down completely. Unplug the power cable and, on a laptop, the charger.
2. Hold the power button for 30 seconds, then reconnect and start.
3. Test each port with a simple device such as a mouse.
4. Check whether the ports work in the BIOS setup screen. If the keyboard responds there, the hardware is fine.
5. Check Windows Update for further updates, including optional driver updates.

If some ports work and others do not, note which ones, as they may belong to different controllers.

Advanced Steps for Stubborn Cases

Reinstall the USB controllers.

1. Open Device Manager and expand Universal Serial Bus controllers.
2. Right-click each “USB Host Controller” and “USB Root Hub” entry and choose Uninstall device. Input devices may stop briefly.
3. Restart the PC. Windows reinstalls the controllers automatically.
4. Install the latest chipset and USB drivers from the PC or motherboard manufacturer.
5. Turn off Fast Startup in Power Options, and disable “USB selective suspend setting” in the advanced power settings.

If the ports worked before one particular update and nothing else helps, uninstall that update through View update history and pause updates for a week.

Safety and Data Warning

Before uninstalling USB controllers on a desktop with only a USB keyboard and mouse, be aware that you may lose input until the restart. Save your work first, and know that holding the power button will shut down the PC if needed. Do not remove a security update permanently.

Conclusion

USB ports that stop after an update are suffering from a driver or power-state problem. A full power drain, reinstalling the controllers, and fresh chipset drivers restore them in most cases.